HSSK-Manufacture supply directly Q35Y-20 Series hydraulic ironworker On promotion
Parameter
|
Model |
Q35Y-20 |
|
Punching Pressure (T) |
90T |
|
Max cutting thickness ofsteel plates (mm) |
20 |
|
Material strength (N/mm²) |
≤450 |
|
Angle of shear (º) |
8º |
|
Flat bar shearing (T×W) (mm) |
20×330 10×480 |
|
Max length of cylinder stroke (mm) |
80 |
|
Trips frequency (times/min) |
12-20 |
|
Depth of throat (mm) |
355 |
|
Punch depth (mm) |
20 |
|
Max punching diameter (mm) |
30 |
|
Motor power |
7.5 |
|
Overall dimensions (L×W×H)(mm) |
1950×900×1950 |
Q35Y Hydraulic Ironworker can punch and shear all kinds of material such as metal plate, square bar, round bar, angle steel, channel steel, I-steel. Q35Y Hydraulic Ironworker has another special function, that is, it can also bend the plate below 500mm. With its multifunction, Q35Y Hydraulic Ironworker is your first choice among the counterpart machine. All the components are of the highest quality in their safety, function, capability and maintenance.
1. High Quality Components & System
Q35Y Hydraulic Ironworker adopt Schneider Electric System, Japan VALQUA seal, Japan Omron proximity switch, and Italy ATOS hydraulic system, in order to provide you with high performance.
2. Cost Effective
Q35Y Hydraulic Ironworker With Very good price/performance ratio
Q35Y Hydraulic Ironworker model options to meet your different requirement.
3. Stable Performance & Reliable Quality
Q35Y Hydraulic Ironworker use hydraulic transmission. Light weight, low noise, reliable performance.
4. Simple Operation
The operation of the hydraulic ironworker is controlled by foot switch.
Related Product Parameter
OUR SERVICE:
1. Warranty: 14 months after delivery the goods.
2. Payment: 30% down payment and 70% paid after receiving the copy of the
documents.
3. Delivery: 30 days after receiving 30% down payment.
4. Loading: Plastic cover coat, through containers
5. Technique support and service: support twice operating training, first one is
at my factory during the processing time, second one at the buyer’s factory during
the re-installation/testing period. We will send our engineers go to buyer’s
factory help to re-install this machine if customer required, and the customer need
to pay for heir flight tickets(go and back), room and board, local travel cost.
| Contact Person : | Grace |
|---|
